Hot Water Natural Gas/LP Belt Drive HEG-3005-0E8G

HEG Series

Pump: Belt drive triplex piston General pump with ceramic plungers · Thermal relief valve · Factory preset trapping unloader · Adjustable high pressure detergent injection

Motor: Open drip-proof electric motor with thermal overload protection

Frame: Powder coated steel side panels and frame · Removable panels for easy access to all internal components

Components: Electronic ignition with standing pilot light automatically lights the burner · Natural gas or LP gas-fired (vapor only) natural draft with aspirating-type burner, 10-inch draft diverter · 1/2-inch schedule 80-coil with heat exchanger · On/off pump/motor switch · On/off burner switch · Adjustable thermostat · High pressure outlet hose connection

Unit Includes: Quick connect nozzles (0°, 15°, 25° and 40°) · 50-foot x 3/8-inch steel wire-braided pressure hose with quick connects, swivel and bend restrictors · Professional-grade insulated trigger gun with safety lock-off · Adjustable pressure insulated dual lance with fixed detergent nozzle

Miscellanous: Temperature rise 150°F above ambient, achieves 250°F/121°C outlet temperature with steam option

Liquid Propane (Vapor Only) HX-0105

Converts natural gas pressure washer to operate on liquid propane (vapor only)

Hour Meter HX-0106

Displays number of hours unit has been in operation

Time Delay Shutdown HX-0107

Timer will shut unit off automatically when trigger gun is released and timer reaches setting

Note: This option cannot be ordered with HX-0108 (1) Remote Station, you will need to order HX-0223 Time Delay Shutdown and First Remote instead

(1) Remote Station (Auto Start/Stop N/A) HX-0108

Adds control box which may be mounted away from unit to control on/off, burner and soap injection

Note: This option cannot be ordered with HX-0107 Time Delay Shutdown, you will need to order HX-0223 Time Delay Shutdown and First Remote instead

Time Delay And First Remote HX-0109

Time Delay And First Remote HX-0109

Additional Remotes (up to 3) HX-0110

Additional remotes that may be added to unit after the first remote is installed

Auto Start/Stop HX-0111

When trigger gun is released, the timer will turn unit off; when trigger gun is pulled unit will restart

K7 Unloader (Flow Sensitive) (Auto Start/Stop N/A) HX-0112

Converts pressure trapping unloader system to flow actuated K7 unloader. Pressure is not trapping in the discharge line when trigger is released.

Dual Gun HX-0114

Two guns may be sprayed at the same time, flow is divided between the two guns while each operator maintains equal system pressure

Stainless-Steel Access Panels HX-0115

Converts powder coated painted access panels to stainless-steel material

Stainless-Steel Coil Wrap HX-0116

Converts powder coated painted coil wrap to stainless-steel material

Painted Box Kit HX-0117

Adds painted side and end panels

Painted and Stainless-Steel Box Kit HX-0118

Adds stainless-steel side panels and painted end panels

250°F Steam HX-0122

Steam option adjusts unloader valve counter-clockwise increasing outlet temperature to 250°F while lowering system pressure

Auto Start/Stop with First Remote HX-0124

When trigger gun is released timer will turn unit off, when trigger gun is pulled unit will restart; adds control box which may be mounted away from unit to control on/off, burner and soap injection

All Stainless-Steel Frame and Hardware on Modular Units HX-0154

Converts powder coated painted frame and hardware to stainless-steel material

Auto Start/Stop HX-0181

When trigger gun is released, the timer will turn unit off; when trigger gun is pulled unit will restart

(1) Remote Station HX-0182

Adds control box which may be mounted away from unit to control on/off, burner and soap injection

Additional Remotes (up to 3) HX-0183

Additional remotes that may be added to unit after the first remote is installed

Elevated Float Tank, 5.0 GPM HX-0217

Float tank is located at the back of the unit

Request More Information

Customer Service

Need Help?
1-513-353-0100

Submit Question