HEG Series
Pump: Belt drive triplex piston General pump with ceramic plungers · Thermal relief valve · Factory preset trapping unloader · Adjustable high pressure detergent injection
Motor: Open drip-proof electric motor with thermal overload protection
Frame: Powder coated steel side panels and frame · Removable panels for easy access to all internal components
Components: Electronic ignition with standing pilot light automatically lights the burner · Natural gas or LP gas-fired (vapor only) natural draft with aspirating-type burner, 10-inch draft diverter · 1/2-inch schedule 80-coil with heat exchanger · On/off pump/motor switch · On/off burner switch · Adjustable thermostat · High pressure outlet hose connection
Unit Includes: Quick connect nozzles (0°, 15°, 25° and 40°) · 50-foot x 3/8-inch steel wire-braided pressure hose with quick connects, swivel and bend restrictors · Professional-grade insulated trigger gun with safety lock-off · Adjustable pressure insulated dual lance with fixed detergent nozzle
Miscellanous: Temperature rise 150°F above ambient, achieves 250°F/121°C outlet temperature with steam option
Water Temperature | Hot |
Net Weight | 758.00 lbs. |
Shipping Weight | 878.00 lbs. |
Length | 56.50 in. |
Width | 29.00 in. |
Height | 49.75 in. |
Liquid Propane (Vapor Only) HX-0105
Converts natural gas pressure washer to operate on liquid propane (vapor only)
Hour Meter HX-0106
Displays number of hours unit has been in operation
Time Delay Shutdown HX-0107
Timer will shut unit off automatically when trigger gun is released and timer reaches setting
Note: This option cannot be ordered with HX-0108 (1) Remote Station, you will need to order HX-0223 Time Delay Shutdown and First Remote instead
(1) Remote Station (Auto Start/Stop N/A) HX-0108
Adds control box which may be mounted away from unit to control on/off, burner and soap injection
Note: This option cannot be ordered with HX-0107 Time Delay Shutdown, you will need to order HX-0223 Time Delay Shutdown and First Remote instead
Time Delay And First Remote HX-0109
Time Delay And First Remote HX-0109Additional Remotes (up to 3) HX-0110
Additional remotes that may be added to unit after the first remote is installed
Auto Start/Stop HX-0111
When trigger gun is released, the timer will turn unit off; when trigger gun is pulled unit will restart
K7 Unloader (Flow Sensitive) (Auto Start/Stop N/A) HX-0112
Converts pressure trapping unloader system to flow actuated K7 unloader. Pressure is not trapping in the discharge line when trigger is released.
Dual Gun HX-0114
Two guns may be sprayed at the same time, flow is divided between the two guns while each operator maintains equal system pressure
Stainless-Steel Access Panels HX-0115
Converts powder coated painted access panels to stainless-steel material
Stainless-Steel Coil Wrap HX-0116
Converts powder coated painted coil wrap to stainless-steel material
Painted Box Kit HX-0117
Adds painted side and end panels
Painted and Stainless-Steel Box Kit HX-0118
Adds stainless-steel side panels and painted end panels
250°F Steam HX-0122
Steam option adjusts unloader valve counter-clockwise increasing outlet temperature to 250°F while lowering system pressure
Auto Start/Stop with First Remote HX-0124
When trigger gun is released timer will turn unit off, when trigger gun is pulled unit will restart; adds control box which may be mounted away from unit to control on/off, burner and soap injection
All Stainless-Steel Frame and Hardware on Modular Units HX-0154
Converts powder coated painted frame and hardware to stainless-steel material
Auto Start/Stop HX-0181
When trigger gun is released, the timer will turn unit off; when trigger gun is pulled unit will restart
(1) Remote Station HX-0182
Adds control box which may be mounted away from unit to control on/off, burner and soap injection
Additional Remotes (up to 3) HX-0183
Additional remotes that may be added to unit after the first remote is installed
Elevated Float Tank, 5.0 GPM HX-0217
Float tank is located at the back of the unit